Home > Function introduction of commonly used rubber testing equipment

Function introduction of commonly used rubber testing equipment

Edit: John 2020-03-02 Mobile


  1. Tensile machine: test rubber elongation

  2. Aging test box: It can be used for hot air aging test of rubber and plastic products, electrical insulation and other materials to test the accelerated aging results of plastics;

  3. Low temperature brittleness tester for rubber and plastic: it can make a comparative appraisal of the performance of rubber waterstop material under low temperature conditions;

  4. Punching machine: for rubber factory and scientific research unit to punch standard rubber test piece before tensile test;

  5. Cutting knife: It can be used to take samples of the punching machine, which can cut samples such as tensile and tear;

  6. Abrasion tester: perform abrasion tests on rubber materials;

  7, hardness tester: used to determine the hardness of vulcanized rubber and plastic products;

  8. Thickness gauge: used to measure the thickness of vulcanized rubber and plastic products;

  9. Plasticity test: The slicer is used to take a 16mm diameter sample, and then the plasticity test is performed on the plasticity tester;

  10. Compression permanent deformer: used for vulcanized rubber, thermoplastic rubber under normal temperature, high temperature and low temperature conditions, with a certain compression rate, after a certain compression time to determine the amount of rubber deformation;

  11. Impact elasticity testing machine: determine the rebound value of vulcanized rubber with hardness between 30-85IRHD;

  12. Rotorless vulcanizer: It is used to measure the characteristics of unvulcanized rubber and find out the most suitable vulcanization time for the rubber;

  13. Mooney viscometer: used to measure Mooney viscosity, scorch time and fluidization index of various unvulcanized natural rubber, synthetic rubber and recycled rubber

Function introduction of commonly used rubber testing equipment Related information
The auxiliary machine on the rubber mixer provides various rubbers for the internal mixer and the auxiliary devices for conveying, weighing and feeding the raw materials. Usually includes: carbon bla...