Home > Operation Method of Small Mixer

Operation Method of Small Mixer

Edit: John 2020-03-17 Mobile

  Small mixer is a kind of high-strength interstitial mixing equipment developed on the basis of open mixer. It is mainly used for plasticizing and mixing of rubber. Small mixer has a large Mixing capacity and high production efficiency can overcome the problem of dust flying everywhere and reduce unnecessary loss of compounding agents. The main operating methods of small mixers are as follows.

  

  1. While calculating the amount of rubber mixture and the actual formula at one time, reasonable arrangements must be made according to the capacity of the mixing chamber and the appropriate filling factor.

  2. After the actual formula is determined, accurately measure the amount of various raw materials in the formula, then place raw rubber, small materials, accelerators, etc. separately, and then arrange them on the rack in order.

  3. Turn on the power and switches of the internal mixer, preheat the internal mixer, and check whether other air pressure, water pressure, and voltage meet the standards. The temperature measurement system, timing device, power system instructions, and Record whether it is normal or not.

  4. After the internal mixer has been preheated, it must be stabilized for a period of time, then prepare the rubber compound, lift the upper plug, and then put the cut raw rubber into the internal mixer from the feeding port. The time is set at one minute.

Operation Method of Small Mixer Related information
1.Triangle package operation method Triangle bag operation method uses a smaller roll pitch (1-1.5mm) or a larger roll pitch (2-2.5mm). During operation, the rubber wrapped on the front roll is first...
Intelligent multi-station full-automatic small material weighing system System Overview: This system is a high-production efficiency, high-precision, fully automatic batching (powder, flake, granula...
Since the basic principle of rubber mixing is to reduce the molecular weight of the solid raw rubber, that is, the degradation reaction of the rubber molecules, all processes related to reducing the ...
In the modern process of human society development. The rubber industry is also an indispensable economic industry. In the development of the rubber industry, the advancement and development of rubbe...
Silicone rubber refers to a rubber whose main chain is composed of silicon and oxygen atoms alternately, and two organic groups are usually connected to the silicon atom. Ordinary silicone rubber is ...