Home > Kneaders VS Mixers

Kneaders VS Mixers

Edit: John 2020-01-30 Mobile

  Kneaders and mixers are actually in line with the current production needs of the industry, but their uses are not the same, and each has its own necessity. The specific differences are as follows.

  The difference between a kneader and an internal mixer: The kneader is an unreasonable mixing function. There is no shear and speed ratio, so the gap between the mixer and the internal mixer is very large.

  

  Here are the differences

  1. Kneader is a comprehensive kneading equipment, also known as kneader. It is mainly a device that can be applied to the kneading, shearing, extrusion, and crushing of high-viscosity to ultra-high-viscosity products to achieve the mixing process. It has the advantages of uniform stirring, no dead corners, and high kneading efficiency, and can install various safety, measurement, control and recording instruments on the kneader. It has been widely used in high-viscosity sealants, silicone rubber, CMC, adhesives, and also used in batteries. , Ink, pigment, dye, medicine, resin, plastic, rubber, cosmetics and other industries.

  2. The internal mixer, also known as the kneader, is one of the reasons why the two are mixed. It is mainly used for the plasticization and mixing of rubber. It has a pair of rotors of a specific shape and relatively rotating, Stop plasticizing and mixing of polymer materials within a certain temperature and pressure range. The kneader is used for the mixing, kneading, crushing, stirring, vulcanization, repolymerization, etc. of high-viscosity, high-elastoplastic materials. It is relatively complete, and the applicable products are also wider. For example, plastics, rubber, silicone rubber, dyes, etc. can be used to produce it. The biggest difference between the two is that the kneader has no shear and speed ratio and is an unreasonable mixing. There is a big difference in dispersion. So whether it is task efficiency or function, the advantages of the kneader are more clear.

Kneaders VS Mixers Related information
Flow chart of auxiliary machine system on tipper kneader (two-story factory building mechanism) system introduction: This system successfully solves the problem of automatic batching of users using...
The auxiliary machine on the rubber mixer provides various rubbers for the internal mixer and the auxiliary devices for conveying, weighing and feeding the raw materials. Usually includes: carbon bla...
Flow chart of auxiliary machine system for intelligent environmental protection mixer (three-storey plant structure) Flow chart of auxiliary equipment system of intelligent environmental protection...
Product introduction The auxiliary machine system of the internal mixer is to realize the automatic transportation, storage, weighing, feeding and other processes of the carbon black, rubber, oil an...
Kneader is used for plasticizing and kneading of rubber and plastic. It is also suitable for mixing and kneading viscous materials. Classification of Kneader: According to the structure, it can be di...